Sad!The man in Liuzhou died unfortunately when performing oil tanks!Witnene: I heard the loud noise at the time of the incident

At 11 am on September 13th, an accident occurred in Zhaotu Village, Chengtuan Town, Liujiang District, Liuzhou City. A man suspected that he suddenly exploded when he welded the oil tank and died unfortunately.

At 12:50 noon on the same day, the reporter took the report to the scene to see that the scene of the incident was located at a oil tank processing site on the roadside roadside roadside road in the middle of Chengtuan Town, National Highway 322. Multiple departments of the Liujiang District Government are pulling a warning line at the scene to investigate the cause of the accident and conduct good back disposal.

The reporter noticed that there were multiple red -brown oil tanks in the processing site, and the explosive tanks were cracking and deformation after explosion.

"At the time of the incident, he heard a loud noise, like a thunder." According to witnesses, the man was welding at the waste tank at the time. I do not know why the oil tank suddenly exploded, and the man died unfortunately on the spot.

According to the nearby villagers of Zhongdutun, Liu's surname Liu is a villager in the surrounding villages. He has rented the land here for oil tanks for several years.

At present, the investigation of the accident and the aftermath disposal are still ongoing.

Professional reminder

Many people know that the tank filled with oil cannot be welded, but it is considered that there is no problem with the empty tank. Do not ignore the risk of empty tank residues. The welding cutting of the empty tank is likely to explode. Before cutting and welding, without thorough cleaning, replacement, and fire analysis, the flammable and explosive gas and the air were mixed with a certain concentration.

Related Links

Waste oil tanks are dangerous items and cannot be cut casually. In order to ensure safety, the following matters should be paid when cutting:

1. Waste oil tank cutting operators must hold effective professional operating qualification certificates, familiarize themselves with and master the methods of processing safety technology operations for waste oil tanks to cut into cut operations.

2. The container that has been installed over oil. Before the fire and cutting operation, the oil stain cleaning agent must be used for soaking, cleaning, and blowing to remove the residual oil in the waste oil tank. Gas and liquids can be fired after the safety factor is reduced.

3. Before cutting, filter water in the can, or use a portable water cutting machine for cutting.

4. When cutting waste oil tanks, pay attention to fully ventilation to reduce the concentration of combustible gas.

5. The cutting operation of the waste oil tank must have a special person for on -site monitoring.

6. It is strictly forbidden to cut two (or above) waste oil tanks at the same time.

Precautions for production safety of electrical welders

The accident is distressed,

Sound the alarm for us!

Source | South State This News reporter Huang Yuanlai

Source: South China Journal

- END -