Invite a round of bright moon to shine on your post

□ Zibo Daily/Zibo Evening News/Expo News

Reporter Dong Zhenxia Correspondent Shao Bo

"Ensure the quality of the product. We have been on duty in the past few days, and the company's production is normal." During the Mid -Autumn Festival, reporters at various branches of Shan Aluminum found that more than half of the employees who insisted on their posts. Line volume indicators; some hold the equipment and inspect the workshop over and over again; some carry tools to perform process switching and hidden danger rectification ... The company produces a line, booming, and another kind of different kind of busy. Moon Festival.

Inspection staff of each position is strengthening inspections

Inspection

In the southern area of ​​the southern area of ​​the second aluminum aluminum aluminum products, the company's model worker and Ding class leader Li Haibin have been busy in the post in the past few days. In order to ensure the quality of dual -five -hydrogen aluminum products, he accurately adjusted the materials of the rotor and the diluted liquid was accurately controlled to control the particle size of the product. In the control room, several young employees stared at the computer screen, tapped the mouse, and the number of changing numbers was the result of the continuous innovation of the company's production indicators. "Today's Mid -Autumn Festival, we are all in their posts!" Li Haibin, who came back to the inspection, said that on September 10, he kept paying close attention to the key links such as seeding tanks, spinners, etc. A few days of enterprise production is smooth and orderly.

Workers who work overtime alumina plant

Busy

On September 10th, Yang Chunhua, a technical backbone on the job. In the main control room of the east line of the roasting workshop, Yang Chunhua, who is the main operator, must squat on the ground from time to time to make a screening test. The roasting furnace is the main link of controlling product particle size. The position of the post changes the granularity of the self -testing material according to the operation of the operation, and adjusts the parameters of the furnace temperature and circulation in a timely manner according to the results to stabilize the thermal work system and ensure that the granularity indicator is met. At the scene, the squad leader Sun Xiaobu hurriedly measured the temperature of the circulating water pump motor on the first floor, and sometimes climbed the stairs to the platform to twist the oil cup, and sometimes observed the instrument index ... After a day, I took tens of thousands of steps. He said that as an old employee who has entered the factory for more than 20 years, he has become accustomed to working normally on the holiday. "The more the festival, the more we must inspect the period to ensure the stable operation of the long cycle of the baking furnace."

In the mine, two forklifts shuttled back and forth. Not far away, "Wow,", the ore dumped from high altitude. This is the first level of the ore entering the production process, and it is a key link for stable ingredients. After the scheduling at the early morning of September 10, Jia Yuliang, deputy director of the production center, hurried to the mine, checking the deposit of the ore pile, and explaining the proportion of ore ore and safety precautions to the driver.

Work hard

assay

At the technical service center, the female squad leader Sun Hui led the team to carefully analyze the samples, ticking, shaking, measurement, calculation ... The seemingly simple bottle can, but it was detailed to operate, and he couldn't tolerate the little bit! "There are many job samples, and there is a employee for leave, and four people who make samples take turns to work together." Sun Hui said that because there are many samples and tight reporting time, in order to produce "eyes", to guide production with accurate and timely data. They are often busy until one o'clock in the afternoon to eat in the morning.

Early in the morning on September 10th, at the high washing and lower slot station of the raw material area of ​​the alumina plant, Dingban employees in the next night shifted to work overtime to prepare for isolation 2#high washing. Nearly 100 degrees of bottom flowing in the slot, waves of steam from the mouth of the pipeline, the sweat beads kept falling down the workers' cheeks, but everyone did not care about wiping sweat, hammer, prying, prying, prying Stick and flat shovel together, check the process, hang the gourd, unload the screws, cooperate with tacit understanding and methodical.

Workers in functional material factory workshops are technical innovation

Persist in front -line workers who work at work

Under the diluted slot of the dissolution process, after the main operator Ma Xiaoli and the secondary operator Liu Xinhe resumed the diluted tank heat exchange process, they began to put the separated diluted tank and clean up the site hygiene. While the two recycled the residual material in the sewage pump, the two were lined up and the scarred miscellaneous objects were cleaned near the diluted slot. This kind of work was four or five hours.

At the scene of the high -quality area, Jin Wenlong, a busy young deputy director, took the initiative to abandon rest to work overtime. After going to work early on September 10, he carefully checked 1#1#flat disk replacing the fabric project. Before the Mid -Autumn Festival, new projects such as the 1#flat disk replaced the fabric, the 2#flat plate real and the vacuum maintenance, and the burden on the shoulders of Jin Wenlong, the deputy director, became heavier and heavier.

Functional material factory, on September 10th at the work of the night. The staff of the positions of Class C and Class C, Gangyu Gong District arrived on time. After the shift of the class carefully, the intercom on the post came from time to time: "The ball is normal, the water material is normal, and the ball is used normally." "The vertical kiln The product is normal, the gas is normal, and the pins are normal. "

In control room, two young employees are staring at the computer screen

Li Haibin in the post

In the factory area, Mingyue was born, and the machine was booming in the workshop. During the Mid -Autumn Festival, the four vertical kiln in Gangyu Industry District all operated normally, and the production rhythm was tight and busy. In order to catch up with the target of output progress, the Class C team refined the production tasks of the class according to the production plan of the work zone, strictly controlled the process quality indicators, and the main control and inspectors cooperated tacitly to further reduce the fluctuation of the indicators. In terms of key energy consumption indicators such as power reduction, gas consumption, and raw materials, the team said that they have set in detail the control tasks of the class indicator to enhance the operation and control of the energy consumption index, accurate control, and the production tasks will be successfully completed.

Analyze the sample carefully

In the centralized laboratory of production and operation, the laboratory members have checked product indicators over and over."We focus on product indicators, strictly check the quality indicators to ensure that each product is qualified to leave the factory." Under the Mingyue, every busy figure in the factory area, workshop, and posts isThe thrust is the help of the city's rapid progress.

- END -