The rainfall is coming!but......

Since August 7

Wuhan Center Meteorological Observatory

High -temperature red warning signals have been released for 7 consecutive days!

It is expected to be three days in the future

Controlled by the subtropical high -pressure control

Most of Hubei Province, sunny and hot, high temperature weather continues

High temperature is still generally above 37 ° C

39-42 ℃ in some areas

Local high as high as 43 ° C or more

There is a good news

On August 16th and West and Northern Hubei Province

Will be welcomed as thunderstorms

Partially accompanied by short -term heavy precipitation

Strong convection weather such as thunderstorms and winds

The highest temperature decreases slightly

but

High -temperature heat waves will continue on August 17

Specific forecast in the next three days

August 13th

The province is cloudy.

Wind: Southern Wind 3 to 4, Gust 5 to 6 levels

The highest temperature: 37-39 ° C in Jianghan Plain, local 40-41 ° C; 39-42 ° C in other areas, and local 43 ° C

Minimum temperature: 23-26 ℃ in Enshi area; 27-30 ℃ in other areas

Daily average temperature: 33-36 ℃ in most regions

Weather on August 14th

The province's sunny days are cloudy, among which there are partial shower or thunderstorms in the afternoon of northwestern Hubei.

Wind: Southern Wind 3 to 4, Gust 5 to 6 levels

The highest temperature: 37-39 ° C in Jianghan Plain, local 40-41 ° C; 39-42 ° C in other areas, and local 43 ° C

Minimum temperature: 23-26 ℃ in Enshi area; 28-31 ℃ in other areas

August 15 weather

The province's sunny days are cloudy, among which there are partial shower or thunderstorms in northwestern Hubei, southwestern Hubei, and northeast Hubei.

Wind: Southern Wind 3 to 4, Gust 5 to 6 levels

The highest temperature: 38-39 ° C in Jianghan Plain, local 40-41 ° C; 39-42 ° C in other areas, and local 43 ° C

Minimum temperature: 23-26 ℃ in Enshi area; 28-31 ℃ in other areas

(Wuhan Center Meteorological Observatory August 13th forecast)

Continue to high temperature beware of electrical fires

The high -temperature weather of this summer's ultra -long standby makes the air conditioner and fan joint operation, and the electric load is high. If there is still security risks such as aging, overloading, and short circuit in electrical lines, you may not pay attention to it. Electric fire generally refers to the heat energy that has failed to release the failure of electrical lines, electric equipment, appliances, and equipment; The fire caused by igniting the body or other combustibles also includes a fire caused by lightning and electrostatic. The occurrence of electrical fires generally has the characteristics of concealment, randomness, suddenness, and easy spreading, and is particularly harmful. How can we prevent "unfolding"?

How to prevent electrical fires

The line wiring should be reasonable and standardized. The construction and equipment installation of electrical lines must be standardized, which meets the requirements of the regulations. Do not do it privately or ask the non -qualified decoration team and personnel to lay electric wires and connect electric equipment. Install and repair electrical appliances to find qualified units and personnel;

Develop the habit of regular inspection. Check the insulation performance, electrical component function and equipment status, especially the reliability of short circuit protection and overload protection;

Leakage protection is indispensable. Improve short -circuit protection and overload protection, install circuit breakers and leakage protectors;

The purchase of electrical appliances must have quality assurance. Don't buy "Three None" fake and inferior electrical products for cheapness;

Reject overload. Do not insert a multi -electrical plug, especially some high -power electrical appliances, and do not use a plug -in board to use it, it is easy to have hidden dangers;

Pay attention to the environment. Do not use electrical appliances or bright wires in high temperature and humid environments. Do not have flammable and combustible materials around.

Electrical fire exclusion

When a fire occurs in electricity lines and electrical equipment, it is generally used to take a power -off and fire extinguishing method when leading to nearby combustibles, that is, to cut off the power in time according to the different situations of the fire field, and then the rescue. Pay attention not to use water to save fire first, because electrical lines and equipment are generally charged, and water -saving can make people shock, and the purpose of fire saving can not be achieved. The loss will be even more heavy. Electrical fire occurs, and only when the power supply has been cut off, the fire can be used to extinguish the fire. In the case of whether the power supply is not cut off, the fire extinguishing agent such as dry powder, carbon dioxide, and carbon chloride can be used.

Hubei News Official Production | Reprinted please indicate the source

Supervision: Guo Xiaorong

- END -