The "heat" love under the welding flower, they take high temperature to step up the manufacture of the Wuhan University highway and the friendly avenue elevated steel box beam

Organizers are working. Reporter Ren Yong

The Yangtze River Daily Da Wuhan Client July 25 (Reporter Tao Changning Correspondent Chang Cen) On the 25th, Wuhan Meteorological Observatory issued a high -temperature orange warning signal, and the highest temperature in most areas in the city reached 37 ° C. However, in the second workshop of the China First Metallurgical Steel Structure Branch, which is located in Xinzhou Yangluo, more than 400 workers are still stepping up key engineering steel box beams such as Wuhan University highways and friendship avenue elevated. More than 100 cool -drinking houses with cold drinks and cold drinks are ready to prevent heat and cool down for the workers at any time.

Drink water for welding workers. Reporter Ren Yong

At 9:30 in the morning, the outdoor temperature had reached 35 ° C. The reporter of the Yangtze River Daily walked into the second workshop of the China Yiyan Gonggong Steel Structure Branch. It felt a bit cooler than the outdoor. Introduction to the welding worker Changchang Linye, this is the largest workshop in the entire plant, with an area of ​​about 40,000 square meters and a height of 47 meters. The roof is installed with a thermal insulation layer. Because the space is too large, it is not a closed space, so it is not suitable to install the air conditioner, so it is not suitable to install the air conditioner, so it is not suitable to install the air conditioner, so it is not suitable The workshop is equipped with more than 100 drums to cool down for workers.

The welder Lu Li is using buried arc welding steel plates. Reporter Ren Yong

In the workshop, more than 400 workers such as welders, rivet workers, drivingmen, and cranes are working nervously. In some areas, there are huge steel box beams, about 3.5 meters high, and about 30 meters wide. Changlin Ye introduced this is the construction of the Wuhan University highway steel box beams. After the factory welded, they were transported to the site to assemble.

The welders are welding the Wusteen Highway steel box beam. Reporter Ren Yong

The reporter saw that there were some small steel box beams in the workshop, but the construction was more difficult. Tong Zhigang, a welder, was fully armed and drilled into the steel box beam with only half a person to weld. He saw that his cat entered his waist and squatted inside for welding. After half an hour, he opened the mask and sweat.

Tong Zhigang, a welder, finished his work and drilled out half -height steel box beams. Reporter Ren Yong

"This steel box beam is the component of the Basin Panchong Bridge project of the Banchang Mountain. The volume is smaller than the highway steel box beam, and people can only squat inside to weld. Generally, it is rest every 2 hours. Now the weather is too hot. It will come out every half an hour. "He said that the long -sleeved work clothes he wore were white canvas, which can resist the damage to the skin when operating in the narrow space. The reporter took the thermometer into the steel box beam worked by Tong Zhigang and displayed it as 40 ° C.

The temperature in the steel box beam is 40 ° C, which is six or seven higher than the room temperature. Reporter Ren Yong

Lu Li is a female electric welder. She is using buried arc welding stitching steel plates. This is a semi -automatic welding. Although the spark is not large, the reporter stands on the steel plate with her, which can obviously feel that the welding steel plate gap is high at the gap, and people are like standing on a oven. "Although the weather is hot, we must ensure that the steel components of each project are delivered smoothly, and the company’s heatstroke cooling measures are also in place."

The welders are welding the Wusteen Highway steel box beam. Reporter Ren Yong

According to Changlin Ye, since the high temperature weather, the workshop safety officer inspected at any time. In some relatively sultry operation environment, the two must be on the job at the same time, one person welded the operation, and the other was on the side to ensure safety. The workshop is always prepared by Dan, Ten drops of water, Huoxiang Zhengqi and other heat -reducing drugs.

The reporter found that in addition to the freezer in the workshop, a cold water room was also set up next to the workshop with air conditioning and cold drink machines, and various ice drinks such as mineral water, salty guys, cola, tea, etc. Essence Changlin Ye said that the lunch break has also been extended. The company has a public bathroom. The workers can rush cold after eating at noon.

Workers went to the cold water room to rest and drink water. Reporter Ren Yong

【Edit: Ding】

For more exciting content, please download the "Da Wuhan" client in the major application markets.

- END -