How to handle 3C certification?Process and requirements

3C certification verification factory ensures the effectiveness of passing certification:

(1) Basis inspection: Factory capacity inspection requirements, national standards for authentication products, type test reports, and certification implementation rules for certification products;

(2) Several conclusions of factory inspection: Factory inspection is qualified, the factory documents are unqualified, the factory is seriously unqualified, the factory needs to be verified, the factory is seriously unqualified, the factory inspection is unqualified

(3) For the first certified enterprise, the certification agency will issue a factory inspection notice to the certification enterprise after receiving the inspection agency submitted the product inspection results report, and issue a factory inspection task to the certification agency's factory inspection team;

(4) Inspection personnel should conduct on -site inspections of customs declaration enterprises in the requirements of the "Product Certification Factory Quality Assurance Ability", extract certain samples, and verify the consistency of the inspection results

(5) After passing the inspection, the inspection team shall issue a factory inspection report in accordance with the prescribed report format, and submit it to the certification agency for review and evaluation;

(6) The time for submitting the report after the factory is usually 5 working days. The reviewer completes the on -site review and calculates from the date of receiving the report of unqualified corrective correction measures. The company can apply for 3C certification by themselves or entrusts 3C agencies. Generally, small factories lack a special person in charge of the authentication and certification of the factory system, and they are not familiar with the 3C certification process. They do too much trouble. When applying for it, they work hard and do not know how to apply;

How to apply for 3C certification?

1. Individuals must not apply for 3C certification. 3C rules stipulate that individuals cannot apply, and must be enterprise talents.

2. Once again, CCC must have on -site inspection processes. If there is no factory, your product can only be reviewed by your processing enterprise, where to produce and where to review!

3.3C certification cannot apply for an individual in the name of the company. CQC is reviewed by the factory. If you do not have a factory, you can certify the product producer.

4. If you have no factory, you can find a foundry.

application process.

Business applications, the application includes applicants, manufacturers, manufacturers and products related information. Each type of product must be applied separately. Commodities of the same model and different manufacturers can also be applied separately.

The first stage: Huatongwei accepts the application.

After receiving the application for CQC, CQC issued a notice to the applicant to notify the applicant to send or send relevant documents and materials. The application stage becomes 1.

CQC sends relevant fees and notifications at the same time.

Applicants provide the required information to CQC.

After paying, please fill in the payment voucher.

The second stage: data review.

Product certification engineers need to divide the application unit during the material review stage.

After the packaging, if the sample test is required, the product certification engineer will send the sample notification and the corresponding charging notice to the applicant, and at the same time send the sample receiving notification to the relevant testing agency.

The third stage: the sample is received.

The sample is directly delivered by the applicant to the specified testing agency.

After paying, please fill in the payment voucher.

The inspection agency accepts the samples and fills in the sample acceptance report. It has a rectification notice for non -qualified samples, and the acceptance report is filled in after the rectification.

After the sample is accepted, the detection agency is filled in the CQC sample detection progress table.

After the CQC received the sample testing progress, after confirming the relevant fees paid by the applicant, they issued a formal acceptance notice to the applicant, and sent the test task book to the testing agency. The sample test officially started.

Fourth stage: sample test.

During the sample, the applicant shall be rectified in accordance with the sample test rectification notification.

After the sample is completed, the test agency is notified by filling in the sample test results.

The inspection agency also transmits information such as inspection reports to CQC.

Fifth stage: factory inspection.

The application for factory review shall be approved by the inspection team.

Sixth stage: qualified assessment.

After the product certification engineer collected the results of each stage, the preliminary evaluation was conducted.

The above results are reviewed by the qualified evaluation personnel.

Seventh stage: recognition certificate.

The director issued a certificate.

Step 8: Printing, receiving, sending and management of certificates.

The applicant prints the certificate certificate and obtains or obtains a certificate on its own.

3C application notice.

1. CCC logo purchase method.

1. Enterprises that have obtained the CCC certificate can apply directly at the CCC certification logo management center for application.

CCC signs size specifications and prices.

CCC signs size specifications and prices.

Please provide: A. Apply for the purchase logo and stamped with the official seal.

B. Clear CCC Certificate Copy.

If the agency purchase (non -application certificate applicant), it must also provide a attorney issued by the certificate applicant.

2. Applicants can purchase trademarks by mail order.

B. After accepting the signing center, send "form invoices" (that is, payment notice) within two working days.

Applying the enterprise after receiving the "formal invoice" remittance. The name of the remittance on the bill shall be the same as the remittance name in the application for the application.

After the payment arrives, the logo center sends the CCC logo and the official invoice to the purchase company.

The size specifications and prices of the CCC logo.

Note: A total of 50 editions per box. (8mm100/version, 15mm90/version, 30mm30 version, 45mm9 version, 60mm9 version)

Third, precautions.

1. When the CCC logo is purchased by imported cars and medical device products, the original and certificates must be provided (the original in special circumstances), the original entrusted book (the original 3C certificate can not be provided under special circumstances).2. Details according to the implementation of fire products: The holder of the fire product certificate to obtain the certification sign to the certification agency according to the production plan, once or twice a year.

3. The CCC logo can be added to the same product type used in the factory (according to the compulsory product catalog issued by the General Administration of Quality Supervision, Inspection and Quarantine of the Quality inspection and Supervision Commission, the 7th to 10 digits of the 3C certificate number can be identified as the same product type)Other CCC certification products of the same logo type (S or S & E, etc.).According to the regulations, the use of the CCC logo truthfully and archives the CCC logo.

The minimum number of CCC logos per batch is a version.

Want to know more exciting content, come and pay attention to Huatongwei testing and certification

- END -