The first case in Hubei!Autonomous research and development robots with power on the 10 kV high -voltage line construction construction

Cao Lei, Chief Reporter of Polar News

Correspondent Song Anqi Sun Shuangxue

The thick iron arm is like the hands of the power operator. The difference is that blue laser will emit blue, and the insulation layer of the high -voltage wire is completed with advanced cutting technology, and then the entire lead is completed ... June 24th, in Wuhan, in Wuhan City, in Wuhan City At the construction site of Qingshan District, the State Grid Wuhan Power Supply Company successfully completed Hubei's first independent R & D robot to carry out 10 kV air lines.

The robot completes the power operation on the overhead line (the picture is provided by the correspondent)

At 10:30 am on June 24th, the Fifth Road was built in Qingshan District, Wuhan, and a "charged operation robot" driven by the track slowly drove to the 10 kV Sunshine Ring 13. It will carry out power operations on this overhead line to complete the first robot construction in Hubei Province.

With the completion of the debugging, under the control of the power staff, the "long arm" of the robot with power operations slowly rose, accurately simulating the hands of the piercing operator on the air line, and then completed the identification and positioning of the lead and the main line.

When the "hands" of the robot with a power operation work firmly grasped the wire, then "launched" a blue laser, accurately cut the peeling of the wire insulating layer, and then put the lead and the main line accurately and quickly into the thread clip. Finally Perform tight and complete the matching of the branch lead.

Wu Xin, a technician of the State Grid Wuhan Power Supply Company's Power Operation Center, introduced that the robot with power operations mainly meets the white dot positioning of the lens and the flexible cooperation of the air arms to meet the complex operating environment conditions. : "The use of power -based operating robots can effectively solve the largest charging and fire on the spot, and effectively avoid the risk of personal electric shock that may generate traditional operating methods."

Jimu Journalists learned that the robotic operating robot was jointly developed by the State Grid Wuhan Power Supply Company and the State Grid Hubei Academy of Electrical Sciences. It is the first self -developed research and development, with independent intellectual property rights and successfully applied by Hubei Province. Robotics, using 3D printing technology to make the production robot production integrated, pioneered the potential operating mode in the field of distribution networks.

According to the on -site power expert, the robot with a power -based operating operator is used to use a multi -layer combination shielding design to increase the level of the 5 electromagnetic antiprolement of the robot to the highest level. The operating mode uses the robotic arm to directly grab the wires. At the same time, ensure personal safety.

According to the State Grid Wuhan Power Supply Company, since this year, the company has accumulated a total of 2,000 power operations, reducing the 82048 power outages, and realizing 14.59 million kilowatt -hours of power supply. Promoting the power -based operation has entered normalization.

The technology used by the distribution line of the distribution network also fills the gap in Hubei's autonomous technology in the 10 kV matching network. According to reports, next, robotics and equipment will continue to be promoted and applied in Hubei.

In addition, in order to practice the concept of "non -stop power stopping is the best service", the State Grid Wuhan Power Supply Company has fully launched the transfer of power facilities for power facilities, which provides a strong support for improving the reliability of power supply and optimizing the business environment of Wuhan Power Grid. Essence

- END -