RS3 Pro+DJI Map Evaluation, you think of the unexpectedly inside

Hello everyone, this is Wang Xinyi, what I will share with you today is

DJI's new model RS3 Pro and DJI Tu Biography

Let us 1+1 equal to infinite.

For centuries of light and shadow, the shadow is followed, and the century of light and shadow refers to the history of more than 100 years since the birth of the film to the present, and the shadow is followed by the development of the entire film history. Continuous updates.

The current Ronin is the ground -end product line of DJI Pro. Its ecological structure is growing step by step. Movie machines, stabilizers, map transmission, and professional accessories are all available.

This time we received DJI RS3 Pro, LiDAR laser rangers, and the newly released DJI Tu Biography. Let's talk about what the RS3 Pro has upgraded this time.

The new RS3 Pro has added the Bluetooth control function, allowing the problem that it has troubled us for many years. It can only be used to connect the stabilizer and the recording of the shooting equipment. The connection is also very simple.

Take the Sony A7S3 as an example. First, the stabilizer drops the menu, open the Bluetooth search in the upper right corner, then enter the camera menu, find Bluetooth, and open the Bluetooth. At this time, the camera name will be displayed on the stabilizer.

However, when we tested, I found that another A7S3 cannot use Bluetooth function normally. Do not panic. It is not stable and the camera problems. Instead, the camera settings are not turned on. There is a Bluetooth control in the transmission that needs to be turned on. After opening it, you can use it normally. Everyone will experience how cool the restraint of the line is.

This update has given up the M key from Ruying S to the M key on Rugai RS2 as a mode switching method, but uses the side physical switch design.

To be honest, the M and recording keys of RS2 are particularly close to each other. I often want to press recording. Instead, I will mistakenly encounter the M key. The M key is a switch mode and a cycle. The mode you need is very inconvenient.

This time, all of them became physical keys on the RS3 Pro to switch pattern, and the M key, the factory setting is the lock screen button, even if it is accidentally touched, it doesn't matter. Of course, you can also enter the menu. You choose to set the M key to take a picture or the Lidar AM/MF function.

In the full -scale follow -up mode, the mode can be changed by a 1.8 -inch touch screen on the stabilizer, 360 °, vertical and custom shooting. The dual -axis follow mode is fixed in the parallel mode of follow -up mode. The RS3 Pro uses a new 1.8 -inch OLED touch screen, which is increased by 28%more than the previous RS2. After increasing, you can choose the menu you want to choose more comfortably after the screen. Focusing system, the opposite lens is based on the focus of debugging.

The RS3PRO menu arrangement is also optimized. DJI engineers optimize the 4 menus we often use to the main interface. The focus displayed screen can appear from left to right. It has been clear at a glance, and it is easy to get started.

I was wondering, will I want to make that menu appear in the future, and can I realize it?

I wanted to find a problem when we used Ru Ying S. When the scene was completed, we needed a transfer to the venue, holding a stabilizer in our hands, looking at it as if we were in a day of class. "Dang".

Later, a shaft lock function appeared. This function was already very satisfied at the time, and the latest design of Rushan RS3 Pro really made me never expect. Open, we played this feature for a long time, which is so fun.

It is as if I have a deformation of King Kong in my hand. The engineers in DJI will bring us some very practical functions each time, rather than adding those unrealistic functions. To be honest, we really never thought of this function, because we are all used to it, and after the shooting is over, we lock each shaft.

Now, whether it is standing or shutting down, it can be locked automatically. Save a lot of time costs for us.

The settings of the RS3 Pro automatic axis lock are divided into three types, and the first one returns and locks. This is the state where the stabilizer is opened. The second is folded and locks, and put it away after shutting down. However, you will find that the pitch shaft will not be completely retracted. This is designed by the RS3 Pro to increase the length of the axis arm. This is because many large devices and movie machines cannot be fully stored back to the center position.

DJI also mentioned Ruying Ecology at the new product conference. Ruying Ecology is DJI's ground -end shooting system. It is committed to empowering the film and television industry and providing professional and reliable product ecology and shooting solutions for imaging creators.

Speaking of this a little excited. When we evaluated like a shadow 4D last year, I lamented that the lidar laser ranging meter was too cool. Before that, we used RS2 to cooperate with DJI's 3D focusing device to allow the movie lens to have autofocus, but You know that you can't compare, because you have used the Lidar laser ranging to be more refreshing. This time, DJI is not hesitant. The lidar laser ranging can be used for RS3 Pro alone. After we test it, one word ——— Cool.

It is also simple and convenient to use. Put the LIDAR ranging from the hot boots interface, insert the wire, and install the follower at the same time. There is a warm reminder here. Before use, enter the RS3 Pro menu, find the function of the wheels, adjust it to the adjustment of the wheels, adjust it to the transfer of the wheels, adjust it to the transfer of the wheels, and adjust it to the transfer of the wheels. Follow the coke motor, because the focus will be used in a while.

The RS3 Pro screen is scratched to the right, and you can see the screen. Click on the lower right corner of the screen. The first lens configuration, this will enter your lens focal length, such as: 16,50,75, etc., you can slide, and then perform the value. Fine tuning.

After the completion, the lens starts with the focus. After the completion, it will be prompted to 1 meter distance. At this time, the dial wheels are used to be used to adjust it with the focus. You don't have to worry about finding a distance. There will be a prompt distance in the stabilizer screen. Just watch the screen and find the distance, confirm the focus, and get it.

Other parameters do not need to move, and the speed of the focus is adjusted according to personal habits.

Click on the lower left corner of the screen is the free point focus. This object you want to shoot directly on the stabilizer screen and let it automatically track this object.

We can use it when shooting surrounding objects, and we can solve the problem of following the follow -up of our film lens, and then click the wide area focus. This cannot be determined by ourselves.

However, the face tracking is very powerful. No one's face can continue to track. This function depends on the new 4,3200 laser ranging point of the LIDAR ranging meter, as well as a 70 -degree viewing angle range. The parameter storage table of three sets of lenses was added.

Normally, let's shoot only one lens. DJI is intimately prepared, and it is simple to use. You can set the required lens in the lens configuration. Then double -click the FN buttons next to the distance measuring instrument. It will automatically perform motor calibration. Then click AF/MF, and the indicator light becomes green.

To be honest, it is too convenient. Time in the studio is money, which can make the stabilizer quickly replace the lens. It can also be used as an automatic focus lens. If you need to focus, you only need to press the AF/MF on the lidar ranginger once you need to press the AF/MF on the LIDAR ranging device to just follow the AF/MF on the lidar ranginger to just follow the AF/MF on the LIDAR ranginger. You can turn into a manual lens in one second. Use the dial wheel in front of the RS3 Pro for manual coke. The next game needs to be automatically focusing, and then press it to return to the automatic focus. But, the design of the focus of the focus is a bit awkward. First of all, this time it is still a double -layer fast -loading version. Use the upper fast -loading version. It can be quickly installed with the catheter of the focus component. Only screws can be used to fix the catheter of the focus of the focus, so that the convenience is lost.

We are mostly with movie lenses, and we will have more when we are installing on the distance. The fast -loading board of the original belt cannot meet our needs. The rabbit cage used on the camera can also be installed on the front of the 15 mm catheter, but the 12 mm catheter cannot be universal with the focus of DJI, and the attachment to the focus component is similar to that of Alai positioning to sell holes. Unfortunately, it cannot be installed in the rabbit cage. Next, the problem now is to either use a small double -layer fast version or the fast -loading version of a third -party manufacturer.

This time DJI has sold the best maps and Gao Liang monitors that we feel the best. This makes me very excited. We have felt on Ruying 4D. Convenience,

Due to the problem of the stabilizer interface, the transmission and the Lidar laser rangefinder use the same interface. It is a pity not to use these two functions at the same time. But it is a pity that I think the engineers in DJI can soon solve this problem.

DJI Tu Chuan is equipped with a safety box, which can be installed with the transmitter and high -lit monitor. Everyone should have experienced that the screen is the most prone to damage during transportation. Most manufacturers will not be equipped with a dedicated one. Safety box, but DJI is equipped.

First look at the appearance of the Gao Liang monitor, and it is still equipped with an original rabbit cage. This time, it is also equipped with a hood. Why does the Gao Liang monitor also equipped with a hood? There is a hood to make the supervisor clearer.

The handle on both sides is also equipped. Through fast -moving, it is quickly installed on both sides of the monitor. The handle is also equipped with a wristband. The previous Ruying 4D was not equipped. With a replaceable NP dial to use the NP battery, it is very intimate and will not force us to buy the battery in DJI.

The side of the monitor is HDMI input, which can also be used as an ordinary monitor, but what should I do if I want to output? What should I do if I still need SDI? There is also an extended accessories on the back to meet the HDMI and SDI output functions. At the same time, there is a DC power supply interface. If you need it, you can buy it separately.

Added TF card insertion on the side. This can store 1080P 60 frames and H.264 format proxy in the surveillance. It is used for independent playback and fast -producing use of on -site. You can set the antenna at a high place to make the signal more stable.

DJI's single -selling and Gao Liang monitor can be said to be a benefit for old users. Why do you say so?

You can get electricity directly from Yundai without installing the battery separately. The new O3 PRO technology is adopted. Under unobstructed conditions, you can reach a distance of 6 kilometers. Support 1080p60 frame transmission. Essence

Through the drawing, it can be remotely controlled by the monitor handle at any time as the shadow 4D. It turns out that our car can only use third -party accessories. It is necessary to add a bunch of auxiliary accessories to control. At present, you can control the gimbal, the focus, recording and recovering, and other keys cannot be used. This may be related to the camera protocol.

This time the cooperation between RS3 Pro and DJI Tu has more shooting creative space, and at the same time, the original old equipment can continue to light up, such as the shadow ecology is rising. I hope that in the future Such as shadow ecology to perform more creative shooting.

That's it for today. Welcome to watch my video. Let's see it next time.

- END -