Wars of high temperature guarantee power generation and how to see the peak summer

Maintenance personnel collected to water and recycling pipeline slopes data

The maintenance personnel check the hot surface of the furnace in advance to welcome the peak summer

The maintenance personnel are conducting pipeline metal gold phase testing work

During the peak summer, the inspectors strengthened the supervision of the equipment

The operating department staff is accurately adjusting the operating conditions of the equipment

The maintenance personnel participated in the work of the coal -to -coal machine to dispel the safety bottom work

Inspectors check the switch number before the operation

In high temperature environments, inspectors cool down the automotive machine supplementary machine

At the current period of Yingfeng Summer Insurance, Guinea Shenfu (Shishi) Power Generation Co., Ltd., located in Hongshan Town, is a busy scene. In the face of continuous high temperature weather, how did the day of power generation spend? In this issue of "One Day", we went to the front line of the power plant and followed the operation department to control the inspector Wang Jianhong.

At 6 am, Wang Jianhong went deep at the boiler 10M and inspected the heating surface of the furnace in advance to lay the foundation for the peak summer. The maintenance personnel of the equipment management department will focus on the frequency of on -site equipment inspection and inspection, and focus on the key "care" of important equipment such as boosting stations, main and auxiliary equipment lubricating oil systems and turns, and grasp the operating status of the equipment in real time to ensure that problems are discovered in a timely manner.

An hour later, Wang Jianhong came to the centralized control room on the fifth floor of the Ji Control Building. As the core of the power plant, all the parameters and data of each system feedback are brought together here the National Energy Shenfu (Shishi) Power Generation Co., Ltd. At the scene, the person in charge of the head of the class, the owner of the collection and the auxiliary control, and the deputy value of the deputy duty was staring at the dynamics of various data. Wang Jianhong talked to the staff on duty. Don't forget to write down the notes.

High temperature in summer, a cooling water system at 0m is equivalent to the "central air conditioner" of the equipment. In order to prevent the equipment from "high fever" and ensure its best operating conditions and refrigeration effects, Wang Jianhong will carry out key inspection work here. After discovering possible problems, it will immediately connect with the duty of the class, and let the department send a special person. Go to the scene to isolate the blocking equipment cooler and adjust the circulating water pump rotation filter. "To ensure the constant temperature of cooling water and electrical equipment from the source, it can regularly check the operating status of the air conditioner. The details of the inspection of each work cannot be sloppy." Wang Jianhong said.

At 12 noon, the sun's poisonous and spicy and the high temperature around the power plant, Wang Jianhong's sweat had soaked his shirt, and fell down the brim of the helmet. He rushed to the cooling equipment of the auto machine to check the cooling equipment. Wang Jianhong said: "During the peak summer, the inspectors must increase the number of on -site inspections, comprehensively investigate hidden dangers, and conduct rectification in time to prevent the equipment from over -temperature work."

After eating lunch, Wang Jianhong "set off" again. At this time, it was 2:30 in the afternoon. Wang Jianhong came to the boiler at 7.1m of the boiler. There are many high -temperature and high -pressure steam pipelines in an orderly manner. In addition, the operating equipment is much higher than the outdoor temperature. At this time, Wang Jianhong and his colleagues were using the equipment in their hands to measure data and recorded it. The sweat flowed through their cheeks again and wet their clothes. On the same day, a group of people continued to go deep into core production areas such as auto -room room, boiler area, flue gas dust removal area, flue gas desulfurization system area, and seawater desalination workshop.

In order to ensure the power consumption of high temperature season, every person in power generation is in their respective positions and use their own efforts to escort the peak summer. Wang Jianhong said: "This is the job of power generation people. Some shuttles between each machine every day, while others stick to the screen of the instrument. They are meticulous and are always ready to generate electricity safely and smoothly in this summer."

(Reporter Liu Xiaojuan Li Rongxin Correspondent Meng Zai Huang Bin)

- END -